robertosala
|
Jensen Generator Model 15 Generator - Purchased TnxWill like to upgrade my Jensen 25 hobby line to 25G so I am looking for a used Jensen 15 Generator with nickel plate finish in good shape, please.
Rob.
|
IndianaRog
|
Rob, you need to specify a bit better...are you looking for a #15 of the older, cast iron based variety or the newer type with the pressed aluminum base? Both have the same generator/magnet core and same nickel plated brass lamp post.
The older ones have more charm IMO, will probably last several lifetimes and command more money than the newer ones.
The newer ones have the potential for wear of the aluminum uprights supporting the axle (though I have never seen that happen). They do have the advantage of a better ground, as they actually have a second brass pickup that rubs on the axle...so they can give better light than the older style. The old style depends on a ground connection being made thru the axle via the cast iron uprights...sometimes the light flickers a bit as the oil in the uprights will insulate the connection intermittently.
So, there are your options...newer type are very easy to find, older type take some searching but they are out there.
Rog
|
johnreid
|
Another thing to keep in mind is that on Ebay the newer style usually ends up selling for as much as a new one costs. If you do not want to wait too long it might be wise to contact Ministeam or Jensen and end up with a new one.
|
robertosala
|
Good point Roger!
My 25 hobby is from the beginning of the 70's.
I would like to add something accordingly.
I guess both types will fall into this category cast and aluminum.  though.
You know the restoration of my Jensen 10 is taking up a lot of resources, it has got a cast generator on it... to have the best of both worlds I choose aluminum stamped it is cheaper and will look  better with the stamped/pressed Jensen 25.
Rob.
|
robertosala
|
| Quote: | | John wrote: Another thing to keep in mind is that on Ebay the newer style usually ends up selling for as much as a new one costs. If you do not want to wait too long it might be wise to contact Ministeam or Jensen and end up with a new one. |
Yes, you are right. I saw that a few weeks ago. I was bidding on a used aluminum Jensen 15 that ended up at same price as a new one. I desisted after $75.
Will contact them and see if they have any special deal on one.
Rob
|
IndianaRog
|
Rob, there is an eBay seller who regularly lists new #15 generators for about $94 USD. I don't think you will do better than that, but look around, they are not in short supply so you can afford to shop.
Rog
|
